Prima Luna · Power Amplifiers
PrimaLuna EVO 300 Hybrid Power Amplifier
A hybrid power amplifier with stereo and mono operation over RCA or XLR inputs.
fig. 01 · power amplifiers
PrimaLuna EVO 300 Hybrid Power Amplifier
8 photographs · 5 shown
From Prima Luna
The EVO 300 Hybrid Power Amplifier uses 6 12AU7 tubes ahead of a solid-state output stage. It can run as a stereo or mono amp, with RCA and XLR inputs, speaker outputs for both modes, and rated output above 100 watts per stereo channel into 8 ohms.
Specifications
| Model | Model EVO 300 Hybrid Poweramplifier |
|---|---|
| Power 8 Ohm | > 100 Watts per stereo channel (typical 115 Watts)> 220 Watts per mono channel (typical 245 Watts) |
| Power 4 Ohm | > 150 Watts per stereo channel (typical 160 Watts)> 300 Watts per mono channel (typical 303 Watts) |
| Frequency Response | 10 Hz – 80 kHz +/- 3 dB |
| THD with AABB | < 0.2% 100W @ 8 Ohm (stereo)< 0.2% 245W @ 8 Ohm (mono) |
| S/N Ratio | -105dB (A-Weighted) |
| Input Impedance | 32 kOhm (RCA), 49 kOhm (XLR) for stereo18 kOhm (RCA), 50 kOhm (XLR) for mono |
| Input Sensitivity | 805 mV (RCA), 901mV (XLR) for stereo1330 mV (RCA), 1340 mV (XLR) for mono |
| Total Gain | 30 dB (H), 24 dB (L) |
| Power Consumption | 104 Watts (no signal in); 645W@4R |
| Weight | Net weight: 68.3 lbs / 31 kgShipping Weight: 77.2 lbs / 35 kg |
| Dimensions | 15.9" x 15.2" x 8.1" / 405 x 385 x 205 mm (L x W x H) |
| Shipping dimensions | 22.7" x 18.4" x 12.4" / 578 x 468 x 316 mm (L x W x H) |
| Inputs | 1 pairs Stereo RCA, 1 pair Stereo XLR |
| Outputs | Stereo & Mono output & Trigger output |
| Tube Complement | 6 x 12AU7 |
| Damping Coefficient | 300 (1 kHz) for stereo150 (1 kHz) for mono |
| Product type | hybrid power amplifier |
| Series | EVO 300 Hybrid |
| Amplifier topology | tube input stage and solid-state power stage |