Shunyata · Power Cables · Cables
ALPHA-X POWER CABLES
Reference Series power cord with VTX-Ag conductors, TAPc polarizers, and NR or XC variants.
fig. 01 · power cables
ALPHA-X POWER CABLES
ALPX-PC
current
From Shunyata
ALPHA-X uses 8-gauge VTX-Ag conductors, fluorocarbon dielectric material, CopperCONN carbon-fiber connectors, and four days of KPIP v2 processing. The NR model adds Gen3 NR noise reduction, while the XC model is listed for power-distributor use without the NR circuit.
Specifications
| Gen3 NR | Gen3 NR Perhaps no technology has been more thoroughly researched, measured and third-party tested than Shunyata Research’s power line noise reduction technology. Gen2 NR technology, as used in the Gamma and Theta power cord lines, has been proven effective in heart surgery labs across the U.S. and Europe. Countless iconic recording engineers, mastering studios and musicians have provided vivid accounts supporting the efficacy of Shunyata Research’s NR power cords. |
|---|---|
| KPIP v2 Processing | Shunyata Research’s proprietary Kinetic Phase Inversion Process includes four days of continuous KPIP v2™ processing which refines conductor metals at the atomic level. This dramatically reduces burn-in time and significantly improves sonic performance, delivering a relaxed and life-like presentation. When compared to the original process, KPIP v2™ represents a dramatic performance upgrade on par with a component-level upgrade. | 4-days |
| OFE Alloy 101 | Shunyata Research uses only the highest purity of copper available for the production of its wire products. or C10100 is the highest grade of copper with a minimum 99.99% purity and a conductivity rating of 101% IACS. OFE stands for oxygen-free electrolytic and supersedes the term OFHC (oxygen-free high conductivity). C10100 is the only grade of copper that comes with a written certification of purity. Certified by ASTM F68 C10100. |
| Fluorocarbon dielectrics | Fluorocarbon dielectrics are usually only found in wire used in the aerospace industry, satellites and only the most expensive audiophile cabling. It has special electrical characteristics; very low dielectric absorption, high dielectric strength and exceptional heat resistance. When used in audio and power cables is reduces the perception of dynamic compression and it improves sonic low-level resolution and clarity. |
| CopperCONN® | Many audiophile grade connectors are made from brass or bronze. While some may get a plating of silver, gold or rhodium, the majority of the current is carried by the contact’s base-metal. connectors contain pure copper contacts which have a much higher conductivity than brass. The difference in performance is clearly audible. |
| Conductors | VTX-Ag |
| Gauge | 08 |
| Construction | Construction: 3/4″ tube |
| Dielectric | Fluorocarbon |
| Noise Reduction | NR Model: > 6 dB @ 1 MHz XC Model: None |
| Tech | TAPc Polarizer 2x |
| AC Connector | CopperCONN™ Carbon-Fiber |
| IEC Connector | CopperCONN™ Carbon-Fiber |
| Color | Black flex |
| Standard Length | 1.75 meters |
| Safety Assurance | Safety Assurance: Continuity and polarity tests – by two technicians HiPOT tests insulation breakdown @ 4,500 VAC |