Shunyata · Speaker Cables · Cables
OMEGA-X Speaker Cables
Speaker cable pair using 4-gauge VTX-Ag conductors, TAPc modules, Quad 40 HARP modules, fluorocarbon dielectric material, and platinum-plated fixed terminals.
fig. 01 · speaker cables
OMEGA-X Speaker Cables
OMGX-SP
current
From Shunyata
OMEGA-X Speaker Cables use VTX-Ag conductors with a pure-silver center conductor and pure-copper outer ring. The saved specs list 4-gauge conductors, 4 dual-concentric TAPc modules with 802 elements, Quad 40 HARP modules, fluorocarbon dielectric material, 8 Mobius Suspension points per cable pair, platinum-plated fixed terminals, and 8 days of KPIP processing.
Specifications
| TAPc | (Transverse Axial Polarizer) is a patent-pending technology that couples to the electromagnetic fields surrounding electrical or signal conductors. TAPc behaves like a polarizer, passively reducing electromagnetic distortion that presents as a type of glare on sound or images. | 4 dual concentric modules / 802 elements |
|---|---|
| HARP | was discovered through Gabriel’s research into ‘current drift’ and audio frequency current resonances that occur in speaker cables. Theoretically, a speaker cable may develop current resonances in the audio band, being roughly analogous to standing waves (modals) in room acoustics. The HARP module acts as a current mode diffraction device that breaks up these resonances, improving the perceived resolution and coherency of the system. | Quad 40 |
| KPIP v2 Processing | Shunyata Research’s proprietary Kinetic Phase Inversion Process includes four days of continuous KPIP v2™ processing which refines conductor metals at the atomic level. This dramatically reduces burn-in time and significantly improves sonic performance, delivering a relaxed and life-like presentation. When compared to the original process, KPIP v2™ represents a dramatic performance upgrade on par with a component-level upgrade. |
| Fluorocarbon dielectrics | Fluorocarbon dielectrics are usually only found in wire used in the aerospace industry, satellites and only the most expensive audiophile cabling. It has special electrical characteristics; very low dielectric absorption, high dielectric strength and exceptional heat resistance. When used in audio and power cables is reduces the perception of dynamic compression and it improves sonic low-level resolution and clarity. |
| Conductors | VTX-Ag™ |
| Gauge | 04 |
| Dielectric | Fluorocarbon |
| Terminals | Platinum plated fixed |
| Configurations | Standard, Bi-wire, Tri-wire |
| Möbius Suspension | 8 per cable pair |
| Color | Grey flex |
| KPIP Processing | 8-days |
| Standard Length | 2.50 meters |
| Safety Assurance | Continuity and polarity tests – by two technicians HiPOT tests insulation breakdown @ 1,200 VAC |